Starting to Build My Ground Station

The two major 3D printed components are now complete. The printing has finished, I've removed the support material, I've tapped all of the holes, and I've mounted all of the jacks and switches. This is the build equivalent of framing a house: an appearance of rapid progress soon followed by the appearance of no progress as I go about wiring up the guts and doing the detail work.

It would be great if I could get this finished and running in time to fly with it at the Feat Meet, but it's going to be close. I just placed an order for what I hope are the last of the parts required to finish.

large_ground_station_partial_build_front.jpg

large_ground_station_partial_build_rear.jpg

 

 

 

Additional Tags: 

 

Copyright Notice

NEFPV is a registered not-for-profit corporation. All content is copyright NEFPV, Inc and not to be used without permission.

But seriously, just email us. We're very friendly hobbyists who want to help you out.

 

Recent comments

Zircon - This is a contributing Drupal Theme
Design by WeebPal.